Table of Contents
Advertisement
4.4. Test Strip
Run water
Keep the
through tap
strip in
(1min.)
water (1sec)
NOTE: Level is set 3 as default. If the water is well water or has a hardness level above 90
dF, we recommend that you use filter and refinement devices.
4.5 Water Hardness Table
Level
German dH
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
4.6. Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use the test strip (if available).
4.7. Setting
•
Turn the knob to the "0/Reset" position.
•
Push the "Start/Pause" button and hold down.
•
Turn on the machine.
•
Hold down the "Start/Pause" button until the lights flash and "SL" disappears.
•
The machine will display the last setting.
•
Set the level by pushing the "Start/Pause" button.
•
Switch off the machine to save the setting.
4.8. Detergent usage
Only use detergents specifically designed for domestic dishwashers.
Add the recommended amount of detergent for the selected programme to ensure the best
performance.
Keep your detergents in cool, dry places out of reach of children.
See the detergent manufacturer's instructions for a further information.
Shake the
strip.
(1min.)
French
British
dF
dE
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-55
29-39
56-90
40-63
EN - 10
Wait
Set the hardness level of
your machine.
1
2
3
4
5
6
Indicator
Wash LED is on.
Rinse LED is on.
Dry LED is on.
End LED is on.
Wash and End LEDs are on.
Rinse and End LEDs are on.
Advertisement
Table of Contents
