Introduction; Control Panel; Service Test - Teka LCZ 837 Service Manual

LCZ 837 - LP7 811 - LPM 809 - LV 831 - MLP 800

1. Introduction

El presente manual técnico explica cómo acceder al test de servicio de los modelos
indicados, así como el significado de los distintos códigos de error.

2. Control panel

1.ON/OFF Button
2.Power on light
3.Program buttons

3. Service Test

To activate test program, with the door closed and machine off, hold down the 1 hour
Program button and press the POWER button until the machine enter into Test
Program. Press 1 hour Program again to start.
During test program running you can press Program button to jump into next step
except inlet valve step).
No. Proceso
0 Initialization
1 Inlet valve
Washing pump
2
and dispenser
3 Heating element
Service Manual: MSDW15050
Service Manual
4.Salt and rinse aid warning light
5.Half load button
6.Program indicator lights
Display
88
Open inlet valve and feeds with 3.6L wáter (3.0L
0A
Dispenser will act once and washing pump will
09
Run washing pump and heating element until the
08 water temperatura reaches 57ºC. Then the
Press Program button to jump into the next
Estado
Power on, stand by
in 45 cm models)
run for 60 sec. in this step
machine will pause
step
- 1 -