Introduction; Control Panel; Service Test - Teka DW7 57 FI Service Manual

1. Introduction

This document explains how to perform the Service Test for the related Dishwasher.

2. Control Panel

1.ON/OFF button
2.Power on light
3.Delayed start button
4.Display

3. Service Test

To activate test program, with the door opened and machine off, hold down the
Program button and press the POWER button until the machine enter into Test
Program. The appliance will pause and stand by(as step 00). Then close the door to
start the Test Program.
During test program running you can press Program button to jump into next step
(except inlet valve step).
No. Proceso
Initialization
0
1 Inlet valve
Washing pump
2
and dispenser
3 Heating element
4 Drain pump
Service Manual: MSDW15070
Service Manual
DW7 57 FI – DW7 41 FI – LPI 759
5.Salt and rinse aid warning light
6.Program button
7.Program indicator light
Display
88
Open inlet valve and feeds with 3.6L wáter (3.0L
0A
Dispenser will act once and washing pump will
09
Run washing pump and heating element until the
08
water temperatura reaches 57ºC. Then the
Press Program button to jump into the next
07
Estado
Power on, stand by
in 45 cm models)
run for 60 sec. in this step
machine will pause
step
Drain for 30 sec.
- 1 -