Advertisement
1-2. Insert the mirrors to the windshield. TIP: The mirrors only fit on the vehicle one
way. Insert and tighten two
3. Insert the tabs from the windshield into the holes on the vehicle body. Push until
you hear it 'click' into place.
4. Insert the tabs of the roll bar into the holes on the vehicle body. Push until you
hear it 'click' into place.
5.'Click' the dump gate to the dump on the vehicle body.
1
Ø4x14 screws on each mirror.
4
Advertisement
Need help?
Do you have a question about the 370-239V70 and is the answer not in the manual?