Table of Contents
Advertisement
Loading Roll Media
3.
Attach the media bar ( ) to the media flange ( ).
Insert the side of the media bar with a hole ( ) into the media flange.
When loading roll media with a 3-inch paper tube inner diameter, attach the media flange with
on the inside. When loading roll media with a 2-inch paper tube inner diameter, attach the media
flange with
5
4.
Secure the media flange and media bar with the mounting pin ( ).
1
5.
Load the roll media onto the media flange.
Install the roll media so there is no gap between it and the media flange.
MEMO
Put the secured media flange on the bottom so that the media is wrapped in the clockwise direction when
seen from above. Media cannot be loaded correctly if it has the incorrect orientation.
16
Initial Printer Settings
on the inside.
3
4
2
1
Advertisement
Table of Contents
