Table of Contents
Advertisement
D
INSTALLATION AND ASSEMBLY
D.1
Introduction
WARNING
Refer
to
SAFETY INFORMATION".
To ensure correct operation of the appliance and maintain safe
conditions during use, carefully follow the instructions given in
this chapter.
Check and, if necessary, level the appliance after positioning.
Incorrect levelling can cause appliance malfunctioning.
CAUTION
Keep the ventilation openings in the
appliance casing or in the installation
structure free of any obstructions.
D.2
Customer's responsibilities
The tasks and works required of the Customer are:
• check the floor planarity on which the appliance is placed;
• arrange an earthed power socket of suitable capacity for the
input specified on the data plate;
NOTE!
For information regarding the electrical connection,
refer to "A.10 Electrical connection".
D.3
Unpacking instructions
Unpack the appliance carrying out the following
operations:
• if present, cut the straps and remove the protective film,
taking care not to scratch the surface if scissors or blades
are used;
• if present, remove the cardboard top, the polystyrene
corners and the vertical protection pieces;
• for appliances with stainless steel surfaces, remove the
protective film very slowly without tearing it, to avoid leaving
glue stuck to the surface;
• should this happen, remove the traces of glue with a non-
corrosive solvent, rinsing it off and drying thoroughly;
• it is advisable to go over all the stainless steel surfaces with
a rag soaked in paraffin oil in order to create a protective film.
D.4
Unpacking
"WARNING
AND
D.5
Disposal of packing
The packing must be disposed of in compliance with the
current regulations in the country where the appliance is used.
All the packing materials are environmentally friendly.
They can be safely kept, recycled, or burned in an appropriate
waste incineration plant. Recyclable plastic parts are marked
as follows:
Compostable
• Outer wrapping
Polyethylene
• Straps
Polyethylene foam
• Accessories wrapping
OTHER
15
Advertisement
Table of Contents
