Table of Contents
Advertisement
Appliance
Copy Appliance from
USB
Copy Appliance to
USB
Display Brightness 5
Beeper Volume 3
Alarm Sound 1
Scroll down the navigation bar to view all functions available.
G.4.1 Copy appli-
Copy appliance data from USB to
ance from/to USB
oven
G.4.1 Copy appli-
Copy appliance data from Oven to
ance from/to USB
USB
G.4.2 Display
Set brightness of the display
brightness
G.4.3 Beeper
Set the volume of acoustic signal
Volume
G.4.4 Alarm Sound
Set the tone of acoustic signal
G.4.5 Temperature
Set ℃ or ℉
Unit
G.4.6 Edit Recipe
Change, add or delete recipe image
image
G.4.8 Appliance
Set numeric passcode to enter into
Passcode
"Appliance menu"
G.4.9 Demo Mode
Set the demonstration mode for
exhibition
G.4.10 Restore
Reset the appliance to default factory
Factory Default
settings
G.4.11 Update
Update current firmware
Firmware
NOTE!
Only for specialised personnel
G.4.12 Backlight
Set the dimming time of the display
Dim Time
backlight
G.4.13 Show
Show or hide cooking details during
Recipe Details
cooking cycle
G.4.14 Use
Set the expiration date for use. When
Expiration
it expires, enter the passcode to
navigate the main interface.
G.4.15 Recipe Bar-
Enable barcode reader to recall
code Enabled
recipes.
G.4.16 Alarm Type
Set
appears during the cooking cycle.
G.4.17 Preheat
Set the fan speed during the idle time
Low Fan Speed
of the appliance.
G.4.18 Preheat Hi
Set the fan speed during the preheat
Fan Speed
phase.
G.4.19 Cool Down
Set the fan speed during the cooling
Fan Speed
down phase.
G.4.1
Copy appliance from/to USB
Insert the USB drive into USB port. Refer to F.4.1 USB port for
the instructions.
Touch the corresponding button. Wait until the display shows
the end of the operation.
Copy Appliance from
USB
Copy Appliance to USB
You can upload or download all the settings of "Appliance
menu".
G.4.2
Display brightness
Touch the "Display Brightness" button to set the brightness of
the display.
Display Brightness 5
22
when
the
alarm
message
Touch this button repeatedly to increase the brightness of the
display.
The display shows immediately the new setting.
Once you reach the highest value, it starts again from the
lowest one.
• 1 = min
• 6 = max
G.4.3
Beeper Volume
Touch the "Beeper Volume" button to set the volume of the
acoustic signal.
Beeper Volume 3
Touch this button repeatedly to increase the volume of the
acoustic signal.
The acoustic signal sounds immediately with the new setting.
Once you reach the highest value, it starts again from the
lowest one.
• 1 = min
• 7 = max
G.4.4
Alarm Sound
Touch the "Alarm Sound" button to set the new sound for alarm
events.
Alarm Sound 1
Touch this button repeatedly to change the type of sound for
alarm events.
Once you reach the latest sound, it starts again from the first
one.
• 1 = first
• 13 = last
G.4.5
Temperature Unit
Touch the "Temperature Unit" button to set ℃ (Celsius) or ℉
(Fahrenheit).
Temperature Unit °C
G.4.6
Edit Recipe image
Touch the "Edit Recipe image" button to add or delete recipe
images.
NOTE!
The file format for the image is "PNG". Suggested
image dimensions are 113 pixels horizontally and
84 pixels vertically. The image dimension must not
exceed 100 kB.
IMPORTANT
The new images must be saved into an empty USB
Flash Drive.
Edit Recipe Image
The display shows the below screen.
Edit Recipe Image
Delete Add
ALL
Advertisement
Table of Contents
