Rowenta OPTIGRILL+XL Instructions For Use Manual page 32

Successive cookings
If you want to cook a second batch of food, please set in temperature the appliance again
(see section 2. "Pre-heating", starting from point 9) even if you want to cook the same type
of food or same program.
How to cook another batch of food:
After finishing your first batch of food:
1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is necessary even if you decide
to pick the same cooking mode than for the previous batch of food).
3. Press the "OK" button: the appliance starts pre-heating. The pre-heating is symbolized by
the cooking level indicator that flashes purple.
4. The pre-heating is complete when an audible beep is heard and the cooking level
indicator stops flashing purple.
5. After the pre-heating, the appliance is ready for use. Open the grill and place the food
inside the appliance.
Important:
- Please note that preheating is required for each new cooking of food.
Reminder: before activating preheating, make sure that the appliance is closed and no
remnants of food remain inside.
- Then wait for preheating to finish before opening the grill and placing food inside.
Note: if the new pre-heating cycle is activated immediately after the end of the preceding
cycle, the pre-heating time will be reduced.
32
19
21
19-20.
When the color corresponding to your
choice of cooking level appears and that
the beep sounds, open the appliance
and remove your food.
21.
Close the appliance. The control panel
will light up and set itself to 'choice of
20
program' mode.
Comment: the security system will
turn off automatically if no program
selection is made.