Rowenta OPTIGRILL+XL Instructions For Use Manual page 25

• Never place the appliance on or near hot or slippery surfaces;
the power cord must never be close to or in contact with hot
parts of the appliance, close to a source of heat or resting on
sharp edges.
• Do not place cooking utensils on the cooking surfaces of the
appliance.
• Never cut food directly on the plates.
• Do not use metal scouring pads, abrasive wire wool or harsh
scouring powder as this may damage the nonstick coating.
• Do not move the appliance when in use.
• Do not carry the appliance by the handle or metallic wires.
• Never run the appliance empty.
• Do not use aluminium foil or other objects between the plate
and the food being cooked.
• Do not remove the grease collection tray while cooking. If
the grease collection tray becomes full when cooking: let the
appliance cool down before emptying.
• Do not place the hot plate on a fragile surface or under water.
• To preserve the non-stick properties of the coating, avoid
excessive pre-heating with the appliance empty.
• The plates should never be handled when hot.
• Do not cook food in aluminium foil.
• To avoid spoiling your appliance, do not use flambé recipes in
connection with it at any time.
• Do not place a sheet of aluminum or any other object between
the plates and the heating element.
• Never heat or cook whilst the grill is open.
• Never heat up the appliance without the cooking plates.
EN
25