Transfer to Third Party
Make sure to provide this manual and all the accessories along with the product to a third party.
To transfer or sell any software application that comes with the product to a third party, the following
requirements must be satisfied:
All provided software applications must be transferred and no backup copies must be retained.
Software applications must be uninstalled before transferring the product.
Transportation
To transport the product, remove the product from the CPU blade and put it in the shipping carton along with
accessories according to "4-2. Installing CPU Blade" described later.
Data Backup
The device failure due to shock or thermal changes, as well as operator's misconduct, may cause loss of
data. To avoid loss of data, NEC recommends that you should make a back-up copy of your valuable data on
a regular basis.
Disposal
Dispose of the product according to all national laws and regulations.
It is the user's responsibility to completely erase or modify all the data stored in
storage device such as hard disk drive, backup data cartridge, floppy disk, or any
other media (CD-R/CD-RW) so that the data cannot be restored.
Notice