Table of Contents
Advertisement
CA-MX55MBK
|
1. insert the cassette for recording in deck B.
When you want to record both sides of a cassette, select reverse mode
by pressing the REV. MODE button so the indicator lights.
. Set the magazine.
Programmed Edit mode.
The P. EDIT indicator lights.
Eorr
Ca]
buttons.
[TIME neg
+10
+1
For example: To set a period of 46 minutes, press the +10 button
four times and press the +1 button six times.
. Press the SIDE A/B button.
SIDEAB
This tells the system that you will be choosing tracks to be recorded on
side A of the tape.
;
The length of time for one side of the tape is displayed. This is half of
the total tape length. The total time for the tracks you choose for each
side cannot exceed this time.
Ifyou do notpress the SIDE A/B button, side Ais automatically selected.
. Press the Disc button and specify the Disc No. of the disc
containing the track to be recorded.
1
2
Oo
O
3
4
Oo
oO
5
6
oO
O
If you use the Remote Controller, press the CD CHANGER button and
then specify one of 1 to 6 with a numeric key.
;
1
2
3
ef
OO
4
5
6
Ce) Cel
To change the disc, specify the Disc No. of another disc again.
CD 10KEY
:
S
Cc
—
bet
CI
CONTINUE
_PRGM
Ce
18
20 (No. 20342)
9. Press the MEMORY button on the CD Automatic Changer.
MEMORY
oa
¢
Upto 16 tracks can be allocated for each side of the cassette.
+
if the length of a track exceeds the remaining tape length, the time
indication blinks on the display. Choose a different track number.
¢
To delete a track from the program, press the CALL button to display
the track to be deleted. Press the STOP/CANCEL button on the CD
Automatic Changer.
10. If you also want to record on the other side of the tape, press the
SIDE A/B button and repeat steps 7-9.
SIDE AB
*
Tocheck the Programmed Edit contents, press the CALL button. Each
time you press the button, the track and step of the displayed side are
shown on the display.
To modify a track in the program, press the CALL button, and call the
track to be modified. Select a new Disc No. and track, then press the
MEMORY buiton.
11.Press the CD DIRECT REC button on the Tape Deck.
CO DIRECT REC
*
The tape is automatically rewound to the beginning of side A, and then
recording begins.
«
When the Tape Deck is set in the reverse mode, after the last track is
recorded on side A, the tape deck high-speed-erases to the end of side
A. Then it changes direction to side B and begins recording the
remaining tracks.
*
To stop recording, press the Stop lM button on deck B, or press the
STOP/CANCEL button on the CD Automatic Changer.
To cancel the Programmed-Edit mode, press the STOP/CANCEL button
on the CD Automatic Changer, then press the PLAY MODE button.
Note:
*
The program cannot be edited during recording.
To modify the
program, cancel the Programmed-Edit mode, and perform step 4 and
subsequent steps.
Note:
*
During recording the Programmed-Edit mode, do not operate the GD
Automatic Changer.
Creating a Blank During Recording
Use the Record Muting function when you do not want to record a section
of the source.
.
1. Press the REC/REC MUTE button onthe Tape Deck at the beginning
of the section you don't want to record.
ad 0...
Ablank of about 4 seconds is created on the cassette, and then the deck
pauses.
2. To start recording again, press the <j or [> button.
*
To create a blank of more than 4 seconds, hold down the REC.REC
MUTE button. When you release this button, the deck pauses.
«
When the source you are recording from is the CD Automatic Changer
and the CD DIRECT REC button is used, the REC/ REC MUTE button
will not function.
¢
The Remote Controller REC button dose not have the REC MUTE
function.
Advertisement
Table of Contents
