Table of Contents
Advertisement
Playing a Tape
DOLBY B NR switch.
The indicator light will go on.
TE)
[a
Note:
*
When cassettes are in both decks A and B, deck B starts first.
3. Shut the cassette holder.
Note:
+
If the system is turned off while a tape is playing, you may not be able
Ou
Playback of the tape in deck B stops temporarily.
Note:
;
*
The PAUSE button only applies to deck B.
CA-MXSSMBK
2. Press the <j or >
button.
The restarts playback of the tape in deck B.
Changing the Playback Direction (Deck B only)
1. To change the playback direction during playback, press
the <j or [> button.
The other side of the tape will now play.
2. Tochange the playback direction without starting playback, press
the <] or > button while also pressing the stop Ml button.
Fast-Winding the Tape
Press the <4 or b> buttons on the Tape Deck to advance the tape rapidly
in the direction of the arrows.
REV. mode selection
Press the REV. MODE button and select the replay mode.
Ifthe REV. MODE button indicator is off, the non-reverse mode is effective.
If you press the REV. MODE button and turn the indicator on, the reverse
mode will become effective.
Non Reverse mode
The tape on deck A and the tape on deck B are played. continuously and °
repeatedly in the direction of the arrow ( t ).
=.
When playing of the tape on deck A ends, then that of the tape on deck B
will start automatically. When playing of the tape on deck Bbegins, the tape
on deck A will be automatically rewound.
When playing of the tape on deck Bends, playing of the tape on deck A will:
begin automatically. When playing of the tape on deck A begins, the tape
on deck B will be automatically rewound.
~
Reverse mode
When playing of the tape on deck A ends, playing of the tape on deck B will
begin automatically. When playing of one side of the tape on deck B ends,
the other side of the tape on deck B will be automatically played. When
'playing of the both sides of the tape on deck B ends, playing of the tape on
deck A begins automatically. The tape on deck A is rewound automatically
when deck B starts playing.
1. Insert cassettes Into decks A and B.
2. Press the REV. MODE button and select the REV. mode.
3. Press the ¢> button on deck A or the <] or ¢> button on deck B.
*
When youselect TAPE with the SOURCE SELECTOR on the amplifier,
deck B starts first.
Music Scanning
The music scan function will detect the blank segments between tracks.
The blank should be about 4 seconds long for the music scan to be
effective.
15
(No. 20342) 17
Advertisement
Table of Contents
