Table of Contents
Advertisement
2-3.
CASSETTE HOLDER REMOVAL
1. Remove
the
Cabinet
and the
Front
Panel. (See Section 2-1, 2-2)
2. Loosen the 2 screws (1) on the Bracket
A (2) and the 2 screws (3) on the Brack-
et B ®. At this time, the work is made
easier by expanding the Springs (5), @)
in the direction of the arrows.
3. Remove the Cassette Holder oO) from
the Tape Transport Chassis.
2-4. TAPE TRANSPORT CHASSIS REMOVAL
1. Remove
the Cabinet and the Front
Panel. (See Section 2-1, 2-2)
2. Remove the 4 screws (1)- (4) .
3. Extract the Insulator Plate A (5) from
~
the Main Chassis (6) .
4. Remove the Reinforcing Angle (7) by
taking off the
2
screws
and
loosing the screw (9) .
5. Retighten temporarily the screw
g) '
6. Remove the Transport Chassis (0) from
the Main Chassis (6) :
@
NN
ne
®)
5
2
144
Fig. 4 Cassette Holder Removal
TAPE
TRANSPORT
°
CHASSIS
Cate
:
©)
7 SSD
mm
:
SA M2.6x4
wy ®
BSA
M2.6x4
Fig. 5 Tape Transport Chassis Removal
Advertisement
Table of Contents
