Page 1
HDMI 2.0 4x4 Matrix Switcher with 4K to 1080p Down-scaling MPN: SW-HDMX44DS VER 1.0 All brand names and trademarks are properties of their respective owners...
Page 2
Specifications ...........................11 Introduction Power LED: Illuminates green when switcher is powered on. The KanexPro SW-HDMX44DS is an HDMI 2.0 compliant 4 input and 4 output Signal Switching Zone: HDMI matrixing switcher. The matrix supports a mix of both 4K and 1080p displays to be connected and operated at the same time.
Page 3
System Diagram RS232 Control Connect the RS232 port to control device (e.g. PC) with RS232 cable. The matrix HDMI: switcher can be controlled by sending RS232 commands. RS232: RS232 Commands The command lists are used to control the switcher. The RS232 control software (e.g. docklight) needs to be installed on the control PC to send RS232 commands.
Page 4
/%S/BAUD:[x]. Set the RS232 baud rate. /%S/BAUD:5. Status. Report all switching status. AV:01->01 The baud rate can be AV:02->02 showed when power on the AV:03->03 unit. [x]=1~7. AV:04->04 [x]=1: 115200, [x]=2: 57600, %9971. Report link status of input 01 02 03 04 /%S/BAUD:5.
Page 5
EDID Management EDIDUpgrade[x]. Upgrade the user-defined EDIDUpgrade1. EDID data. [x]=1. When the command applied, system prompts to upload the EDID Command Description Command Example and Please send the EDID file file (.bin). Operation will be Response within 10s! cancelled in 10 seconds EDIDG[x].
Page 6
Video Resolution Down-scaling Specifications The matrix supports video resolution downscaling, the 4K Video Input (4096x2160/3840x2160) input can be automatically degraded to 1080p output Input (4) HDMI for compatibility with 1080p display, shown in the below chart. Input Connector (4) female type A HDMI HDMI Version Input Output...
Need help?
Do you have a question about the SW-HDMX44DS and is the answer not in the manual?
Questions and answers