Advertisement
3G SDI 8x8 Matrix Switcher
1
INTRODUCTION....................................................1
2
SPECIFICATION.....................................................2
3
PACKAGE CONTENT.............................................3
4
PANEL DESCRIPTION............................................3
5
CONNECTION AND OPERATION.............................4
6
WARRANTY................................................................7
SW-SDI8X8
Content
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KanexPro SW-SDI8X8
Summary of Contents for KanexPro SW-SDI8X8
-
Page 1: Table Of Contents
3G SDI 8x8 Matrix Switcher SW-SDI8X8 Content INTRODUCTION………………….…………………………1 SPECIFICATION…………..……..…………………..……..2 PACKAGE CONTENT……….……………………………..3 PANEL DESCRIPTION………………….………….………3 CONNECTION AND OPERATION…………..……………4 WARRANTY........…………..…………...7... -
Page 2: Introduction
1. INTRODUCTION 1.1 Product Description The KanexPro 8x8 3G SDI Matrix with re-clock technology is an 8-input, 8-output switcher capable of routing high- resolution SMPTE and standard serial digital video signals. It supports input and output re-clocking up to 330 feet (100 meters) for optimum switching at full 1080p HD mode. -
Page 3: Specification
SW-SDI8X8 2. SPECIFICATION Signal Input/ Output 8×SDI BNC Male Input Connector 8×SDI BNC Male Output Connector Support line length (Cable is RG6) 3G(1080P 60HZ) Mode • Input up to 328ft (100m) • Output: up to 295 feet (90m) HD (720P 60HZ) Mode •... -
Page 4: Package Content
SW-SDI8X8 Note: Specifications are subject to change without notice. 3. PACKAGE CONTENT Before using this unit, please check the packaging and make sure the following items are contained in the shipping carton: l 1×Main unit l 1×Power adapter 5V@3A l... -
Page 5: Connection And Operation
SW-SDI8X8 5 CONNECTIONS AND OPERATION 5.1 Connections and Operation (1) Connect the product to appropriate power; (2) Connect SDI signal sources to the SDI inputs “1” … “8” through high-quality 75Ω coaxial cable（RG59、RG6 cable or equivalent as well）; (3) Connect the SDI monitors or other SDI devices to the SDI outputs “A” … “H”... - Page 6 SW-SDI8X8 The button ▼ ▲ on the front panel are used to select the input source, the Power switch on the right side is used to shutdown or start up. Digital tube on the front panel indicates which input the current output signal is derived from.
- Page 7 SW-SDI8X8 5.3 Connection Diagram 6 ...
-
Page 8: Warranty
KanexPro’s entire liability and Customer’s exclusive remedy shall be, at KanexPro option, either return of the price paid for the product, or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to KanexPro with a copy of customers’...
Need help?
Do you have a question about the SW-SDI8X8 and is the answer not in the manual?
Questions and answers