Device Placement - AJAX KeyPad TouchScreen Manual

To run a test, in the Ajax app:
1. Select the required hub.
2. Go to the Devices tab.
3. Select KeyPad TouchScreen from the list.
4. Go to Settings .
5. Select a test:
1. Jeweller Signal Strength Test
2. Wings Signal Strength Test
3. Signal Attenuation Test
6. Run the test.

Device placement

The device is designed for indoor use only.
When choosing where to place the device, consider the parameters that affect
its operation:
Jeweller and Wings signal strength.
Distance between the keypad and the hub or range extender.
Presence of obstacles for radio signal passage: walls, inter oor ceilings,
large objects located in the room.
Consider the recommendations for placement when developing a project for the
security system of the facility. The security system must be designed and
installed by specialists. A list of recommended partners is
KeyPad TouchScreen is best placed indoors near the entrance. This allows
disarming the system before the entry delays have expired and quickly arming
the system when leaving the premises.
available here .