Basic Operations - Kenwood KDC-519 Instruction Manual

Basic Operations of remote
Use one lithium battery (CR2025).
Insert the batteries with the + and- poles aligned properly,
following the illustration inside the case.
___) Keep on slide
@ Pull out
FwAR.,.GJ
Store unused batteries out of the reach of children. Contact a doctor
immediately if tile battery is accidentally swallowed.
//_Do not set the remote on hot places such as above the dashboard.
[FM]/[AM] buttons
Select the band.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
[1<<]/ [1_1_1] b uttons
Tune up or down band.
[#0] -- [#9] buttons
Press buttons [#1] --[#6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning> (page 13) mode.
[VOL.] buttons
Adjusting the volume.
[SRC] button
Each time the button is pressed the source switches.
For the source switching order refer to <Selecting the Source>
(page 7).
[ATT] button
Turning the volume down quickly.
When it is pressed again it returns to the previous level.
[1<<]/[_1] buttons
Doing track forward and backward.
[DISC+]/[DISC-] buttons
Doing album forward and backward.
[1_11] button
Each time the button is pressed the song pauses and plays.
[DNPP]/[OK] button
Enters and cancels the <DNPP (Disc Name Preset Play)> (page
17) mode.
[#0] -- [#9] buttons
When in <Direct Track Search> (page 16) and <Direct Album
Search> (page 16), enter the track/disc number.
22