Basic Operations - Kenwood KRC-603C Instruction Manual

Basic operations (See page 6)
Loudness
Turning on the power: This function amplifies low and high tones when the volume
Press one of the following buttons TAPE. (.DeMD, of TUN is turned down.
The LOUD indicator lights up when the loudness function is
on.
Turn the power on before completing the felloweng procedures
PUA OF Ee nOWwer: ee fro LOU outer to switch the loud d off
Press the PWR OFF button for at feast one cerand , % UUON TO SWITC € touaness On and Olr.
Selecting standby mode:
Press the TUN button repeatedly and switch to "ALL OFF."
When "ALL OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while Jeaving the
power to the unit on. Use this mode when you want to have
the display !luminated but don't want to listen to anything.
Increasing Volume:
Press the "% button to turn up the volume.
Decreasing Volume:
Press the \ button to turn down the volume.
eVaccyilirciasls
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning the volume ail the way down deactivates the attenuator
function.