Kenwood KDC-519 Instruction Manual page 15

When a CD isn't inserted
1
Slide open the faceplate
Press the [A] button.
2 Insert a CD.
//_ When the faceplate has been slid open, it might interfere with the
shift lever or something else. If this happens, pay attention to safety
and r-rlovetile shift lever or take an appropriate action, then operate
tile unit.
• The sound will be temporarily muted while tile faceplate is
moving.
• When a CD is inserted, tile "IN" indicator is ON.
When a CD is inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the [1_11]button.
Each time the button is pressed the CD pauses and plays.
Eject the CD
1 Eject the CD
Press the [A] button.
2
Close the faeeplate
Press the [A] button.
//_ 3 in. (8cm) CD cannot be played. Using an adapter and inserting
them into this unit can
cause damage.
Playing discs set in the optional accessory disc player connected
to this unit.
Press the [SRC] button.
Select the display for the disc player you want,
Display examples:
Display Disc player
"CD2" CD player
"DISC" CD chanqer/MD changer
Pause and play
Press the [1_11] button.
Each time the button is pressed it pauses and plays.
_ • Disc #10 is displayed as "0".
• The functions that can be used and the information that can be
displayed will differ depending on the external disc players being
connected.
Fast Forwarding
Hold down on the [_1] button.
Release your finger to play the disc at that point.
Reversing
Hold down on the [!<<] button.
Release your finger to play the disc at that point,
m15m