Table of Contents
Advertisement
Basic operations (See page 5)
Power
=
Turning on the power:
Press the SRC (source) button.
Turn the power on before carrying out the following procedures.
Turning off the power:
Press the PWR OFF button for at least one second.
Attenuator
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning the volume all the way down deactivates the attenuator
'Switching Modes
'
function.
Switching Modes:
Each time you press the SRC (source) button, the mode
switches as follows:
Loudness
This function amplifies low and high tones when the volume
is turned down.
Tuner mode
The LOUD indicator lights up when the loudness function is
Tape mode
on
v
,
Turning Loudness On/Off:
Disc control mode
Press the LOUD button for at least one second to switch the
loudness on and off.
* The mode switches to the next mode from any mode which
cannot be used.
* The disc control mode will differ depending on the unit that is
connected.
Increasing Volume:
Press the " button to turn up the volume.
Decreasing Volume:
Press the \ button to turn down the volume.
Advertisement
Table of Contents
