Advertisement
2
3
tees
76
Bess Bier anol ys "4
a
Co BELAY
DIRECTION MODE
PAUSE
Tape Dubbing
(from deck A to B)
Manual Dubbing
1 Press FUNCTION to select the
cassette deck.
2
Insert a recorded tape in deck A and
a blank tape in deck B.
3 Set the DIRECTION MODE selector.
To dub on only one side; set it to
To dub on both sides; set it to >.
4 Press REC @.
The deck B enters recording pause
mode.
5 if the desired direction Indicator is
not illuminated, select the side to be
recorded on the deck B.
Press > (for front side recording) or
<i (for reverse side recording).
for) Press D or < on deck A,
Playback starts.
7 Press PAUSE IE.
Normal speed dubbing starts.
To stop dubbing
Press @ on beth decks.
Is it necessary to set DOLBY NA?
No. The tape in deck B is automatically
recording in the same state as the tape in deck
A.
Is it possible to tisten to program sources
other than tape during dubbing?
During high speed dubbing, yes. Any program
source can be selected with the FUNCTION
button.
During manual dubbing, no. The source changes
to the function selected with the FUNCTION
button and the tape playback cannot be dubbed.
POWER
3
EDITTIME FADE
TWERAUE
&
Se!
Gan
[rme)
HALF s*C-46-—+C $a
7
e008) =)
"mes
Ss c.g0e+ 6-74.60
{4SmO0s} (37m00s} (SOMCOs)
78
CD Recording
Out at the Designated
Time — Time Fade
You can have the disc play fade out at
ihe end by designating the playing time
so that the selection at the end of the
tape fades out naturally without breaking
abruptly in the middle. The player records
the selections in the order they appear on
the disc. 5 seconds before the designated
time, the recording tevel falls gradually. At
the designated time, the recording fades
out and the CD piayer enters pause
mode. This function works for both sides
of the tape by designating the time once.
This function works also during repeat,
shuffle, and program play.
Time Fade operation
This operation is not possible with the
remote commander.
1 inseit a blank tape into deck B.
2 Place a disc with the tabel side up,
and close the tray.
3 Press EDIT/TIME FADE three times
and disptay "TIME FADE".
4 Designate the tape tength.
When you use a 46-, 54-, 60-, 74-, or
90-minute cassette tape
Press kks¢d and P>D>p>{.
As you press these buttons, the minute
display changes as shown in the
iustration.
When you choose ''HALF''
The player fades out after playing just the
half of the total playing time of the disc.
When you want to specify the
recording time {of one side of the tape)
more accurately
Press the numeric buttons on the remote
commander, (Make sure to set the
TUNER/EQ/CD
selector to CD.)
Example:
To specify ihe time of 11
minutes 30 seconds, press "1", "1",
"3", and "10°.
(10° functions as the figure "0"".)
(to be continued)
80
OIRECTION MODE
CD Recording ,
>
(continued)
5
Set the DIRECTION MODE selector.
To record on one side, set it to ==.
To record on both sides, set it toc>.
Press REC ©,
The cassette deck enters recording
pause mode.
It the desired direction indicator on
play button is not iNuminated, select
the side to be recorded.
Press & (for front side recording) or
<1 (for reverse side recording)
Press PAUSE if of the cassette deck
and Dii of the CD player.
The pause mode is released, CD
playing starts, and recording starts.
Advertisement
