Advertisement
MEMORY/NEXT |
52
ee
e e
a telel(e)
Storing Stations
You can store up to 20 FM stations and
10 MW stations and 10 LW (SW) stations
(tor the USA model, 20 FM stations and
10 AM stations) in a desired sequence, so
that you can tune in the stored station
directly by entering the preset station
number.
This operation is not possible with the
remote commander.
1 Tune in the desired station.
2 Press MEMORY/NEXT.
"MEMORY"
and the preset station
Numbers appear in the display.
3 While "MEMORY"
is on (for several
seconds), press PRESET/TIMER
—
or + to select a desired preset
number.
4 Press MEMORY /NEXT.
"MEMORY" disappears, the preset
number appears and the station is
stored
5 Repeat step 1 to 4 for each station
to be stored.
If you cannot store a station successfully
Press MEMORY
/ NEXT again so that
"MEMORY" appears, and then proceed with
steps 3 and 4 above.
Be sure io operate while 'MEMORY' is on
{about 4 seconds.)
When you have selected the wrong preset
station number
Press MEMORY/NEXT again and then proceed
with steps 3 and 4.
To change the preset station
Store a desired station at the desired preset
number by proceeding with the above steps.
The station previously preset will be erased.
Erasing only is not possible.
54
'o Tune in a Preset Station
1 Press BAND to select a desired
band.
2 Press PRESET/TIMER - or + to
select the desired preset number.
To tune in a preset station
directiy LY
Possible only with the remote
commander.
1 Set the TUNER/EQ/CO selector to
TUNER.
2 Press BAND to select a desired band.
3 Press the numeric button to select a
desired preset station number.
EJECTS
Tape Playback
Piayback Op:
felal
1 insert a tape in deck A or B.
2 Press D {for front side playback) or
<I (for reverse side playback).
To stop playback
Press @.
To stop for a moment during play
(Deck B only)
Press PAUSE ff.
How to select the DIRECTION
MODE position
To playback one side: set it to ===.
To play back both sides: set it toc>.
To playback both decks in succession: set
it to RELAY. See page 60.
The DIRECTION MODE setting is
effective for both decks.
Playing back Automatically
after Fast Winding — Auto
Play
This function starts playback automatically
from the beginning of the side after fast
winding.
To start playback from the beginning of
the front side
Press > while keeping
4
pressed.
To start playback from the beginning of
the reverse side
Press < while keeping »> pressed.
When listening to the cassette recorded with
the Dolby noise reduction system"
Set the DOLBY NR selector to ON. The setting is
active for both decks. This system is provided
with the DOLBY B NA system.
What is the Dolby NR system?
Dolby NR (noise reduction) system reduces tape
hiss noise in low-level high-frequency signals.
The system boosts these signais during
recording and lowers them during playback.
* Doiby noise reduction manufactured under
license fram Dotby Laboratories Licensing
Corporation.
"DOLBY" and double-D symbot
DD are trademarks of Dolby Laboratories
Licensing Corporation.
Advertisement
