Advertisement
.
RegeEN ie
To stop playing
Press @.
To cancel the program piay
Press CONTINUE.
To check the program
Press CHECK.
Each time you press CHECK, the number
of the disc and the selection appear. After
the last selection is displayed, "CHECK
END" appears in the display.
To erase a selection from the end
of the program
1. Insert the fast disc.
2 Press CLEAR.
Each time you press CLEAR, the
selections are erased from the end of the
program.
If you insert a pause in your program, you
cannot erase the seiections programmed
before the pause.
To erase the entire program
Press Mf once during stop; twice during
play.
Notes on multi-dise program
* You cannot use the repeat play function.
*Do not insert a pause in your program
when you want to use the CD SYNC
button.
if '*-~m--s"
is displayed
* You have programmed a selection
number over 20.
+The total time has exceeded 100
minutes.
To check the remaining time
Press TIME once to see the remaining
time of the selection being played; twice
to see the total remaining time of the
programmed selections of the disc being
played; once more to return to the initial
display.
To check the number of the disc
inserted
Press TIME during stop.
The number of the disc appears.
46
The automatic tuning enables you to find
a station when its signal is strong
enough.
When the signal is too week, use the
manual tuning. This operation is
impossible with the remote commander.
Tuning in Automatically
1 Press BAND repeatedly until the
desired band appears.
As you press BAND, the band
changes as follows:
USA model:
FM —*+ AM
European and U.K. model:
FM—*MW--> LW
Model for other countries:
FM—*MW--+SW
2 Keep TUNING ~ or + depressed for
more than 1 second.
"AUTO" appears in the display and
the unit tunes in a station
automatically.
3 Repeat step 2 until the desired
station appears.
Indicator in the display
TUNED:
Appears when a station of
sufficient signal strength is
tuned in.
STEREO:
Appears when an FM stereo
Program of sufficient signal
strength is received.
Antenna adjustment EY
For FM reception, adjust the length and
direction of the telescopic antenna
(except for MHC-700).
For AM (MW, LW and SW) reception, find
the best location for the supplied AM loop
=<:
antenna.
50
atlelie)
Tuning in Manually
1 Press BAND repeatedly unti} the
desired band appears.
2 Press TUNING
- or + repeatedly
until the desired station appears.
When an FM program is noisy or
hard to receive
Press STEREO/MONO
so that "MONO"
appears in the display. There will be no
stereo effect, but the reception will be
improved.
Press the button again to restore the
stereo effect.
Advertisement
