Advertisement
me | ot — ee et —1 2
Tape transport unit
Relay board
Fig. 3-5
Replacement of Belt
5.
Apply belt to driving pulley and pulley.
1.
Remove set screw (1), and detach Relay board.
6.
Fasten Relay board with screw (1).
2.
Remove set screw (2), and detach Motor holder from
7.
Fasten securely head lead and control lead with
the Tape transport unit
binder.
3.
Replace the old belt with a new one.
8.
Adjust the tape speed.
4.
While applying the belt on the flywheel side. attach
Motor holder to the Tape transport unit.
Advertisement
