Pioneer DC-221Z Service Manual page 6

Dc-2212/220Z
3. DISASSEMBLY
CASSETTE REPLACEMENT PROCEDURES 7. Remove 7 pieces of screw (4), and remove Deck
holder (with Synchro plate).
8. Open Cassette door. (See Fig. 3-3)
9. Remove 4 individual pieces of screw ().
10. Remove Counter belt from Tape counter, and hook
onto the Tape transport unit 2.
11]. Remove the Tape transport unit 1 and 2 from the
Front panel assembly.
1. Remove 7 pieces of screw Q).
2. Remove Bonnet case.
3. Remove 2 pieces of screw Q): and 1 piece of nut Q).
4. Push the claw at the bottom of chassis, remove the
Front panel assembly, and pull out toward you.
Remove the LED assembly from the Front panel
assembly.
5. Remove 6 pieces of screw Q). and enable the Power
amplifier assembly to move upward (See Fig. 3-2)
6. Remove connectors J7, J11, J14, J15, and J19 of the
wiring coming out of the Tape transport unit.
(Separate the front panel from the main body.)
LED assembly