Table of Contents
Advertisement
4.Recording and Playback
Recording Minus One Play
Sones
Composer
SS seater ae a anaes
All Song Play
A
C=)
Song
v
1.
Insert the Music Data disk in the disk drive.
2.
Use the Song [A] and [¥] buttons to choose a song.
3.
Press the [Rec] button to make the button indicator come on.
4.
The tracks that can be recorded are determined by the current state of the perfor-
mance, so use the following steps to set up the performance state according to the
track you wish to record.
Track to be recorded
Operation
[Whole]
Piano
Press the One Touch Program [Piano] button
as
C)
to enable Whole keyboard Play
Low
{Lower] and [Upper]
oo
Press the Split{Lower] button to enable Split Play
Drum! SFX
(Rhythm]
(—_} Press |Drums/SFX] to enable Drum Play
* It's not possible to record the [Bass/Accomp] track.
* If you choose something other than one of the predetermined tracks, nothing will be
recorded to the track, but the performance for that track will be erased.
5.
Press the button for the track you want to record to make the button indicator start
to flash.
6.
Press the [Play] button.
Two measures are counted out, and recording starts.
7.
When the performance is over, press the [Stop] or [Reset] button.
If you press the [Reset] button, the performance stops and is rewound to the begin-
ning of the first measure.
When the performance is stopped, the button indicator for the recorded track stops
flashing and remains continuously lit.
* If you want to save the recorded performance data to disk, take a look at p. 39.
* Recorded performance data for Minus One Play cannot be converted to SMF music data
and saved on disk.
* Sometimes, after recording with
[Whole] tracks certain kind of performance data, the Tone
already stored change to the one you have set.
Advertisement
Table of Contents
