Table of Contents
Advertisement
4.Recording and Playback
Recording at all other times:
Press the [Play] button. You'll hear two bars being counted, then recording starts.
Once recording has started, the indicator for the [Play] button will light steadily instead of
flashing.
3.
When the performance is over, press the [Stop] or [Reset] button.
If you press the [Reset] button, the performance stops and is rewound to the begin-
ning of the first measure.
The indicators on Track buttons where data has been recorded will now light steadi-
ly instead of blinking.
* Some Cautions About Recording
If you perform any of the following operations after making a recording, the performance
data you've recorded will be discarded:
- Switch off the power
- Press the [All Song Play] button to play songs on disk
* Once you have a song recorded on the KR-370, you won't be able to select songs con-
tained on disk. If you want to play data from a disk, first refer to "Erasing All Data" (p. 36).
* In Style Play or in performances which make use of the chorus effect, if you overdo it on
the organ with rotary effect, you might experience problems, including Tones other than
organ being affected by the rotary effect, or the rotary effect on the organ Tone being lost.
If You Make a Mistake in the Performance
If you make a mistake, here's how to do the recording over again.
_.___
Composer —_.
BES,
(AlrSong Play) —
Rhythm
Whole
AC8SRi()
Lower
Upper
All Song Play)
a
ieee a aaa
CS)
Ce)
Song
R
1
2
3
4
v
CC
Reset
Stop
Play)
(Rec)
Bwd
Fwd
ty
);
Ge)
a
| al
1.
Press the [Rec] button to make the button indicator come on.
2.
Press the button for the track that you want to record over again.
The indicator for the Track button starts to flash.
3.
Start recording.
If the performance that you're recording again is shorter than the performance you
recorded before, part of the previous performance remains on the track. If you want
to erase the previous performance completely, you need to delete all of the perfor-
mance data and do the recording over again. (The next section explains how to do
this.)
4.
When finished playing, press the [Stop] or [Reset] button.
Advertisement
Table of Contents
