Page 1
MODEL VC - H998U EZ SET UP It’s as easy as 1 2 3 4 5 1. Connect Cable to VCR. 2. Plug into AC Power Outlet. 3. Wait until completion of auto tuner channel setting and auto clock setting, and then press POWER.
Page 2
This video cassette recorder (VCR) uses “ONLY” cassette tapes, NTSC video signals (standard in US), and 120 V AC, 60 Hz Model No.: ————————— (standard US household current). For future reference, record the model and serial number (located Serial No.: ————————— on the rear of the VCR) in the space provided.
IMPORTANT SAFEGUARDS AND PRECAUTIONS CAUTION READ THE SAFETY AND OPERATING INSTRUCTIONS before operating your VCR. FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your VCR and in this manual. INSTALLATION 1. Operate only from a power source indicated on your VCR or in this manual. If you are unsure of your power supply, ask your local power company.
Page 5
OTHERS 1. It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary.
— Operates the VCR and basic functions of various TVs, Cable Boxes, and some Digital Satellite Re- ceivers. — Remote Pager function • Sharp Super Picture — Enhances picture quality during playback. • Field-Still/Variable Slow/Frame Advance * VCR Plus+ C and PlusCode are trademarks of Gem- •...
Major Components of Your VCR • The display will return to the original mode (counter or clock display) 3 seconds after the VCR enters the operation mode. [Rear] Connection terminals (see Connecting the VCR and Cable TV Connections) Connection terminals (see Tape Dubbing) 3 ↔...
Remote Control Inserting the Batteries Make sure that the batteries have been properly installed first. Fit three batteries type “AA”. If the remote control stops working, fit new batteries. Ensure the batteries are fitted correctly, matching the polarities (j/k) indicated in the remote control.
To determine the correct type of connection, first check the type of antenna and TV terminal in use. Make the connections as shown below. • Consult your SHARP Dealer or Service Center for the type of adaptor, separator, transformer or combiner that might be required.
Need help?
Do you have a question about the VC-H998U and is the answer not in the manual?
Questions and answers