Confirming Timer Programmes; Intelligent Timer Recording (Just Rec); Audio Dubbing - Sharp VC-H900X Operation Manual

For example:
l
LP (long play) mode
SP (standard play) mode
I
Total: 120 minutes
JUST REC does not function when recording programmes in NTSC mode.
l
may not properly work for vrdeo tapes other than E-60, E-90, E-180 and E-240
l
This tape may not be completely used up.
l
When more than one programme is set on the timer, the automatic recording function will work for the length of each trmer-
l
set programme, but not for the total length of all programmes.
When the LP mode is initially used for timer-recording a programme, If the tape is not long enough to record the entire length
l
of the programme, the programme will not be entirely recorded.
q

Audio Dubbing

l
AUDIO IN L-R terminals (or L termrnal
only) on the front of your VCR
(remember to select L2)
PLAY/x2
PAUSE/STILL
STOP
Do not press CHANNEL Y/A (CH r/A) during audio dubbing
l
Because the audio signal is recorded on the mono (linear) track, any previous recording on this track
l
If the Auto Tracking functlon is used during audio dubbing, the recorded audio lnay be distorted. Wait about 4 seconds
l
before pressing PAUSE/STILL to begin audio dubbing in step 0.
3 2
I I
Audio source
PAUSE/STILL
connect it to your
audio equipment.