Sony PVW-2800 Operating Instructions Manual page 87

Automatic setting of AUDIO IN point in audio insert editing
If an AUDIO OUT point has been set, but not an AUDIO IN point, the AUDIO IN
point will automatically be set to the present tape position when you preview or
execute the edit.
Using a player without split-mode functions
Early-model Betacam VTRs, U-matic VTRs and other units may not allow you to
set video anid audio edit points separately. When using such a unit as a player, set
the AUDIO IN/OUT points on the recorder (PV W-2800) side. You will still be
able to perform split edits, with automatic calculation of the fourth video edit point
and the player's AUDIO IN/OUT points.
The maximum number of edit points which can be set manually is five. If more fa
than five edit points are set, the indicator above the DELETE button will begin
flashing. The unit will not execute an edit in this state, so use the DELETE button
to remove the unnecessary edit points.
For example, if you have set four video points and two audio points, one of the
video points is unnecessary and must be deleted before proceeding.
»
2
a s
F4
6
Chapter & Basic Editing i544