Sony PVW-2800 Operating Instructions Manual page 123

Preroll
Ren uraber |
eae
404 FUNCTION MODE
AFTER CUE-UP 1 0: Stop mode.
1: Still mode.
402 TIME [o) When the unit must preroll over a tape ssctlon containing a non-
REFERENCE 1 coniinuous sequence ai time codes, determines whether or not
FOR PREROLL to use CTL signals to generate a continuous sequence,
beginning with the time codes before the break in continuity.
9: Use CTL signals to generate a continuous sequence.
t: Do notuse CTL signals to generate a continuous sequence,
When 0 is selected, maximum tape speed during cue-up or
preroll is limited to 10 times normal speed,
When an IN point has not yet been set at preroll time,
408 puroMaT i a determines whether pressing the PREROLL button should set
REFERENCE an IN point automatically. °
ENTRY 0: Do not set the IN point automatically.
1: Set the IN point automatically.
Tape protection
STILL TIMER
If the unit remains in stop or still mode for a certain period of
'time, it is put automatically into tape protection mode in order to
protect the tape and video heads.
This item determines the length of time allowed to pass before
the unit is put into tape protection mode. The time may set to
'one of the following 16 values, ranging between 0.5 seconds
and 30 minutes.
00: 0.5 seconds
01: 5 seconds
02: 10 seconds
Q3: 20 seconds
04: 30 seconds
05: 40 seconds
06: 50 seconds
07: 1 minuie
08: 2 minutes
08; 3 minutes
10: 4 minutes
14:5 minutes
42: 6 minutes
13: 7 minutes
14: 8 minutes
15: 30 minutes
The measures taken to protect the tape vary, depending upon
whether the unit enters tape protection mode from standby
(search) mode or from stop mode, and upon the settings of the
next three items in this menu.
Chapter 7 Maintenance | 75
Chapter 7