Sony PVW-2800 Operating Instructions Manual page 71

SHUTTLE mode playback
To play back in SHUTTLE mode, foliow this procedure:
SHUTTLE mode playback
1 Push in the search dial to light the SHUTTLE indicator.
The monitor shows a still picture, and the still indicator (-) lights.
pfiete)
Always set the search dial to the center position after turning on the power.
The still indicator (CQ) will light each time you turn the unit on, regardless of
the position of the search dial. .
2 Rotate the dial to the desired speed. =
The dial clicks at the center position, corresponding to a speed of 0. Playback =
begins at the indicated speed. The direction indicators (<I) and >) show the &
direction of playback. é
3 To stop SHUTTLE mode playback, return the search dial to the center
position, or press STOP or one of the other tape transport buttons.
To resume normal playback, press the PLAY button.
Using the SEARCH bution
In SHUTTLE mode, the SEARCH button can be used in the following way.
Pressing the PLAY button alternately with the SEARCH button plays the tape at
normal speed and at the speed selected with the search dial. Pressing the STOP
button alternately with the SEARCH button alternately stops and starts playback at
the selected speed.
Chapter 4 Recording and Playback 4-15