Siemens WNE4A2UPIN User Manual And Installation Instructions page 23

Buttons
8 Buttons
The selection of programme settings depends on the programme that is set.
Buttons
Button
℃ Temp.
⁠ Spin Speed
⁠ Start/Re-
load
⁠ Finish in/
Time Dry
⁠ varioSpeed
⁠ Prewash
⁠ Extra Rinse
⁠ varioSpeed a
nd ⁠ Finish
in/Time Dry
⁠ Select
⁠ Wash+Dry
Selection
- 90
- 1400
Start
¡
Cancel
¡
Pause
¡
Up to 24 hours
Activate
¡
Deactivate
¡
Activate
¡
Deactivate
¡
+1
¡
+2
¡
+3
¡
Activate
¡
Deactivate
¡
Multiple selection
¡
⁠ +
¡
¡
Description
Adjust the temperature.
Set temperature in °C.
Adjust the spin speed or deactivate
the spin cycle.
Set spin speed in rpm.
If is selected, the water is drained
and the spin cycle is deactivated. The
laundry stays wet inside the drum.
Start, cancel or pause the pro-
gramme.
Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Activate or deactivate a shorter pro-
gramme duration.
Note: Energy consumption increases.
The washing result is not affected by
this.
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.
Activate or deactivate up to three ad-
ditional rinse cycles.
Recommended for particularly sensit-
ive skin or in regions with very soft
water.
→ "Childproof lock", Page 32
Select the type of stain.
The temperature, drum movement and
soaking time are all adjusted to suit
the type of stain.
When is selected, only wash-
¡
ing is activated.
Buttons en
23