Table of Contents
Advertisement
8.1.3 Group 5: Zone Tamper
The zone(s) that was tampered with will be displayed on the LCD screen.
8.1.4 Group 6: Zone Low Battery
If a wireless device's battery needs to be replaced, the zone that is assigned
to the device will be displayed on the LCD screen.
8.1.5 Group 7: Zone Fault
A wireless device is no longer communicating with its receiver, or a
connection or CleanMe
8.1.6 Group 8: Clock Loss
The time and date have been reset to the default. This is the only trouble that
we recommend that you correct. Clock Loss [8] to Set will appear on the LCD
screen after you press the [
on page 13 to set the time and date.
12 User Guide
TM
trouble is occurring with your smoke detectors.
] button or the [
TRBL
] key. Refer to section 9.2
Advertisement
Table of Contents
