MotionGrey MEMORY KEYPAD User Manual page 6

3. Operations
• Press the UP key to raise the desk. Release the key to stop the desk's
movement.
• Press the DOWN key to lower the desk. Release the key to stop the
desk's movement.
• Reset: If it's the first time using the desk, if the desk becomes
unbalanced, or if the LED displays incorrect height data, a reset is
needed. Press and hold the UP and DOWN key simultaneously for 5
seconds. Release the keys when the desk returns to its lowest displayed
height. Reset is complete.
• After the motor remains inactive for 60 seconds, the LED screen will
automatically turn off, entering standby mode. Press any key (except
the M key) to resume normal operation.
How to Save a Position:
① Press the UP or DOWN key to adjust the desk to your desired height.
② Press the M key; the display will flash for 5 seconds.
③ Within these 5 seconds, press one of the memory keys to store the
position.
④ Repeat the same process to set up the other 2 memory positions. The 1,
2, and 3 keys on the hand control can each store a different height
position, and this data is retained even in case of a power outage.
⑤ To recall a stored position: Hold down the memory key to reach your
saved height, or press the memory key once for the desk to automatically
adjust to the stored position. (Both modes can be configured based on
customer preferences.) You can also stop the desk by pressing any key
during its movement.
05