Lippert 2000 Series Manual

REPAIRING A SCRATCH ON A BLACK WINDOW
FRAME (SERIES 2000, 8600, 8800 AND 9000)

Purpose

This document outlines how to repair a scratch on black window frame for series 2000, 8600,
8800, and 9000.

Safety

Read and understand all instructions before attempting procedure. Adhere to all safety labels.
Chemical products such as spray paint have health and environmental hazards. To avoid serious
personal injury and death, follow the instructions on the container and read all warning labels.
The "CAUTION" symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth in
Always wear eye protection when performing service, maintenance or installation procedures. Other
safety equipment to consider would be gloves and possibly a full face shield, depending on the

Resources Required

• Rubbing alcohol
• Sandpaper, 180 grit or finer (depending on
severity of the damage)
• Orbital sander (if desired)
NOTE: For best color consistency of the original product the following black paints are recommended:
• 348444 - Forney Brand Black Paint Marker 0230180
• 348997 - SEM 39143 Trim Black Aerosol
NOTE: Color may very slightly, at application or exposure to sun exposure or weather.

Preparation

1.
If window is on a unit, make sure the unit is parked and powered off.
2. Use a soft cloth and rubbing alcohol to clean the damaged area of debris.
3.
Tape off around the area to avoid over spray if using spray paint.
Rev: 06.02.2023
WINDOWS
this manual.
nature of the task.
• Microfiber cloth
• Masking tape
• Black felt tip paint marker*
• Black automotive grade spray paint*
Page 1
CCD-0007406