Electric Starter Models - Robin EH12-2D Instructions For Use Manual

4. ELECTRIC STARTER MODELS
PARTS TO BE PREPARED
• Use a battery rated 12V-24AH or larg¬
er.
• Use a proper cable and ground wire
to connect battery.
BATTERY
For GROUND WIRE, use a flat braided
wire 6f 0.03 sq. in. or larger sectional
area. (SAE GAUGE #4)
WIRING
1. Connect positive terminal on mag¬
netic switch and positive terminal
of the battery with battery cable.
2. Ground negative terminal of the
battery to the body of engine or
machine with ground wire.
3. When installing the key switch on
the machine, Install with its drain
hole at the bottom.
NOTE
Tighten bolts and nuts on terminals
securely so they will not be loosened
by vibration.