Pre-Operation Checks - Robin EH12-2D Instructions For Use Manual

Hide thumbs Also See for EH12-2D:
Table of Contents

Advertisement

3. PRE-OPERATION CHECKS
CHECK ENGINE OIL
Before checking or refilling engine oil,
be sure the engine is located on a
stable, level surface and stopped.
• Do not thread the gauge into oil filler
to check oil level.
• If the oil level is below the lower level
line on the dipstick, refill with the
proper oil (see table) to the upper
level.
• Change oil if it is contaminated.
(See page 15 Maintenance Schedule.)
• Use class SE,SF (API classification)
or higher grade oil.
• If multi-grade oil is employed, oil con¬
sumption tends to increase when the
ambient temperature is high.
*
CHECK FUEL
A CAUTION
Do not refuel while smoking,
near an open flame or other
potential hazards.
• Stop the engine and open the cap.
• Use unleaded gasoline only.
• Close the fuel cock before filling the
fuel tank.
• When filling the fuel tank, always use
the fuel filter.
• Wipe off any spilled fuel before start¬
ing the engine.
-
5
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh12-2bEh17-2dEh17-2bEh2s-2dEh2s-2b

Table of Contents