4. ELECTRIC STARTER MODELS
PARTS TO BE PREPARED
Use a battery rated 12V-24AH or larger.
●
Use a proper cable and ground wire
●
to connect battery.
BATTERY
CABLE
CABLE
LENGTH
DIA.
Less than
7.3 mm
1.5 m
1.5 m
8.5 mm
to 2.5 m
2.5 m
10.8 mm
to 4 m
For GROUND WIRE, use a flat braided
wire of 0.03 sq. in. or larger sectional
area. (SAE GAUGE #4)
WIRING
1. Connect positive terminal on magnetic
switch and positive terminal of the
battery with battery cable.
2. Ground negative terminal of the
battery to the body of engine or
machine with ground wire.
3. When installing the key switch on
the machine, install with its drain
hole at the bottom.
NOTE
Tighten bolts and nuts on terminals
securely so they will not be loosened
by vibration.
- 6 -
WIRE GAUGE
AWG (BS)
SAE
JIS
BWG
1
6
AV15
0
4
AV20
3/0
2
AV30