Power assistance does not activate or shuts down in the following situations:
The speed is above 25km/h
You're not pedalling
The remaining charge in the battery is not sufficient
«0» is the power assistance mode selected
When the control screen is switched off
In case of intensive use and in exceptional climatic conditions, assistance may be cut off to safeguard the whole
system
SCREEN AND CONTROL ELEMENTS
Screen data and function
1
Mode
Maximum assistance
speeds**
2
modes
n to
than
3
di-
the
de
4
11
2
5
3
4
Assistance mode (0-1-2-3):
«0» no assistance.
«1» is the default assistance mode.
Each mode corresponds to the maximum assistance speeds set out below:
0
No assistance
ON/OFF button:
Switch the electrically-assisted bicycle on and off by holding the button down for a few
seconds.
Scroll through the route information (TRIP, ODO, TRIPtoGO) with a short press.
«+» button:
Step up to the higher power assistance mode by briefly pressing the button
Switch to «walk assist» mode by holding the button down for a few seconds.
«-» button:
Switch to a lower power assistance mode by briefly pressing the button.
Resetting the TRIP distance counter by a long press (5-10s)
6
KM
1 13 8
9
1
+50% assistance +100% assistance +150% assistance
7
7
6
12
10
2
3