Error Code A - Decathlon RIVERSIDE 520E User Manual

To find out which controller version is assembled on your bike and the associated error codes, disconnect the
motor connectors beforehand. If the display shows error 42, refer to Table A. If the error displayed is 32, refer to
Table B

ERROR CODE A

Error code
10 / 12 Low battery voltage
11 High battery voltage
20 / 24 /25
Abnormal current or voltage
21 / 23 Temperature sensor error
Prohibited: cleaning using a high-pressure jet.
Not recommended: cleaning under running water.
Recommended: cleaning using a damp sponge.
In case of puncture to the rear wheel, remember to disconnect the motor
cable before removing the wheel from the bike to perform the repair.
If you turn the bike wheels upward (puncture repair etc), be sure to protect
your screen by swivelling it downwards to avoid damaging it.
The motorised wheel is also subject to higher stress than a standard bike
wheel, and although it is reinforced, it is possible that spokes may break. If a
spoke breaks, contact your DECATHLON store.
For more information on use, maintenance, after-sales services or in case of
questions, visit DECATHLON's support website: www.support.decathlon.fr/
or visit a DECATHLON store.
Definition
17
Solutions
Charge the battery.
Switch off the bike and switch it back on again.
Charge the battery. Switch off the bike and switch it
back on again.
Switch off the bike and switch it back on again.