Error Code B - Decathlon RIVERSIDE 520E User Manual

26 / 80 / 82 /
Programme error in the controller
83 / 84
30 Walk mode error
Over-voltage or overheating of the
40 / 41 / 44
motor
42 / 44 Motor error or short circuit
45 Error corrected during use
46 Motor error
Communication error between the
60
screen and the controller
70 / 71 / 72
Torque sensor error
/ 73
81 Unrecognised speed
200 / 201 / 202 Torque or cadence sensor error

ERROR CODE B

Error code
16 / 17
Abnormal voltage in the torque sensor
32 / 33
Motor fault
48 Speed sensor fault in the motor.
49
Cadence sensor malfunction
Definition
18
Switch off the bike and switch it back on again.
Switch off the bike and switch it back on again. Take
care not to overload the motor when in walk mode
(moderate slope, no load on the bike).
Allow the motor to cool by pedalling more gently or
lowering the assistance mode
Check that the screen connections are properly plug-
ged in. Restart the bike.
Switch off the bike and switch it back on again.
Check that the motor connections are properly plug-
ged in. Restart the bike.
Check that the screen connections are properly plug-
ged in. Restart the bike.
Switch off the bike and switch it back on again.
Check that the motor connections are properly plug-
ged in. Restart the bike.
Switch off the bike and switch it back on again.
Solutions
Turn off the bike and remove the battery. Replace the
battery and turn on the bike. If the fault has not disap-
peared, go to a Decathlon workshop for repair.
Check the positioning and condition of the motor
connectors. If the fault has not disappeared, go to a
Decathlon workshop for repair.
Visit a Decathlon store for possible motor diagnostics
Turn off the bike and remove the battery. Replace the
battery and turn the bike back on. If the fault has not
disappeared, go to a Decathlon workshop for repair.