Related Manuals for Raymarine ALPHA
Summary of Contents for Raymarine ALPHA
- Page 1 ALPHA Touchscreen Performance Display INSTALLATION INSTRUCTIONS English (en-US) Date: 09-2023 Document number: 87457 (Rev 1) © 2023 Raymarine UK Limited...
- Page 3 Please check the website to ensure you have the latest documentation. Publication copyright Copyright ©2023 Raymarine UK Ltd. All rights reserved. No parts of this material may be copied, translated, or transmitted (in any medium) without the prior written permission of Raymarine UK Ltd.
-
Page 5: Table Of Contents
CONTENTS CHAPTER 1 IMPORTANT INFORMATION ......8 Parts supplied ..............18 Power cable requirement Safety warnings ..........18 ................8 Inline fuse and thermal breaker ratings Product warnings ....19 ...............8 Regulatory notices ..............8 CHAPTER 5 PRODUCT DIMENSIONS.........20 TFT Displays ................8 Product dimensions ............ - Page 6 Cleaning the sun cover ........38 14.5 ..........56 Required MFD connection ...........38 CHAPTER 15 TECHNICAL SUPPORT........57 Multiple performance display connections ...38 Raymarine product support and servicing 15.1 ..... 58 Network cable extensions Diagnostic product information ..........39 15.2 ......... 59 Learning resources 15.3...
- Page 7 CHAPTER 17 SPARES AND ACCESSORIES ....... 63 Spares 17.1 ..................64 Accessories 17.2 ................64 RayNet to RayNet cables and connectors 17.3 .... 65...
-
Page 8: Chapter 1 Important Information
• Raymarine highly recommends certified installation by Warning: Collision avoidance a Raymarine approved installer. A certified installation In order to avoid potential physical damage to the unit, qualifies for enhanced product warranty benefits. -
Page 9: Water Ingress
Disclaimer Product disposal Raymarine does not warrant that this product is error-free or that it is compatible with products manufactured by any person or entity other than Dispose of this product in accordance with the WEEE Directive. -
Page 10: Imo And Solas
Technical accuracy To the best of our knowledge, the information in this document was correct at the time it was produced. However, Raymarine cannot accept liability for any inaccuracies or omissions it may contain. In addition, our policy of continuous product improvement may change specifications without notice. -
Page 11: Chapter 2 Document Information
CHAPTER 2: DOCUMENT INFORMATION CHAPTER CONTENTS • 2.1 Applicable products — page 12 • 2.2 Multifunction display (MFD) requirement — page 12 • 2.3 Product documentation — page 12 • 2.4 Document illustrations — page 12 Document information... -
Page 12: Applicable Products
Instructions (this document) 81415 Alpha Series Performance Display Operation The Alpha Series performance display is not a standalone product. It MUST Instructions be connected to a Raymarine® Axiom Series or Axiom 2 Series Multifunction display (MFD) / chartplotter. All displays must be running the latest available... -
Page 13: Chapter 3 Product And System Overview
CHAPTER 3: PRODUCT AND SYSTEM OVERVIEW CHAPTER CONTENTS • 3.1 Product overview — page 14 • 3.2 Multifunction display (MFD) requirement — page 14 • 3.3 Required additional components — page 15 • 3.4 System overview (example only) — page 15 •... -
Page 14: Product Overview
• 12 / 24 V dc operation. • Low power consumption: – (Alpha 7 performance display) — 10.10 W (maximum) @ 12 V dc / 12.34 W (maximum) @ 24 V dc – (Alpha 9 performance display) — 12.27 W (maximum) @ 12 V dc / 12.51 W (maximum) @ 24 V dc 3.2 Multifunction display (MFD) requirement... -
Page 15: Required Additional Components
Some installations may also require extensions to network or power cables. For information on cable extensions, refer to: • p.37 — Network connections • p.40 — Power connections RNS-5 Network switch. 2. Alpha 9 performance display. 3. Alpha 7 performance display. Product and system overview... -
Page 16: Software Updates
8. SeaTalkng ® 5–way connector (A06064). 3.5 Software updates The software running on the product can be updated. • Raymarine® periodically releases software updates to improve product performance and add new features. • The software on many products can be updated using a connected and compatible multifunction display (MFD) / chartplotter. -
Page 17: Chapter 4 Parts Supplied
CHAPTER 4: PARTS SUPPLIED CHAPTER CONTENTS • 4.1 Parts supplied — page 18 • 4.2 Power cable requirement — page 18 • 4.3 Inline fuse and thermal breaker ratings — page 19 Parts supplied... -
Page 18: Parts Supplied
“daisy-chained”) in a series. 5. 4 x Threaded studs, M4 x 40 mm. 6. 4 x Thumb nuts. * Supplied with Alpha 7 only — 2 x mounting brackets. 8. * Supplied with Alpha 9 only — 2 x mounting brackets. -
Page 19: Inline Fuse And Thermal Breaker Ratings
The suitable fuse rating for an inline fuse and thermal breaker is dependent on the number of devices you are connecting. When connecting multiple Alpha displays in a series (up to 4 maximum), ensure that the fuse rating is appropriate for the total power consumption of all daisy-chained Alpha displays in your system. -
Page 20: Chapter 5 Product Dimensions
CHAPTER 5: PRODUCT DIMENSIONS CHAPTER CONTENTS • 5.1 Product dimensions — page 21... -
Page 21: Product Dimensions
5.1 Product dimensions Alpha 7 Alpha 9 A) 120.1 mm (4.72 in) A) 148.9 mm (5.86 in) B) 188.4 mm (7.42 in) B) 253.9 mm (9.29 in) C) 7 mm (0.28 in) C) 7 mm (0.28 in) D) 18 mm (0.71 in) D) 20.5 mm (0.81 in) -
Page 22: Chapter 6 Location Requirements
CHAPTER 6: LOCATION REQUIREMENTS CHAPTER CONTENTS • 6.1 Warnings and cautions — page 23 • 6.2 General location requirements — page 23 • 6.3 Compass safe distance — page 23 • 6.4 Viewing angle considerations — page 23 • 6.5 EMC installation guidelines — page 23 •... -
Page 23: Warnings And Cautions
Do NOT mount units or For optimum EMC performance we recommend that wherever possible: cut holes in places which may damage the structure of the vessel. • Raymarine® equipment and cables connected to it are: Location requirements... -
Page 24: Suppression Ferrites
• Use only ferrites of the correct type, supplied by Raymarine® or its authorized dealers. 1. Feed the suppression ferrite approximately halfway down the length of the red (positive) power cable wire. -
Page 25: Connections To Other Equipment
6.9 Connections to other equipment Requirement for ferrites on non-Raymarine cables: If your Raymarine® equipment is to be connected to other equipment using a cable not supplied by Raymarine®, a suppression ferrite MUST always be attached to the cable near the Raymarine® unit. -
Page 26: Chapter 7 Cables And Connections - General Information
CHAPTER 7: CABLES AND CONNECTIONS — GENERAL INFORMATION CHAPTER CONTENTS • 7.1 General cabling guidance — page 27 • 7.2 Connections overview — page 28... -
Page 27: General Cabling Guidance
– High current carrying AC and DC power lines. • Unless otherwise stated only use cables supplied by Raymarine. – Antennas. • Where it is necessary to use non-Raymarine cables, ensure that they are of correct quality and gauge for their intended purpose. (e.g.: longer power Strain relief... -
Page 28: Bare End Wire Connections
Do not connect this unit to a system which has positive 2. Power / RayNet (Ethernet) connector (Port 2 — black ). grounding. 3. Protective cap — only remove if daisy-chaining Alpha Series displays. 7.2 Connections overview The Alpha Series performance display includes the following connections:... -
Page 29: Chapter 8 Mounting
CHAPTER 8: MOUNTING CHAPTER CONTENTS • 8.1 Tools required — page 30 • 8.2 Mounting options — page 30 • 8.3 Horizon level mounting — page 31 • 8.4 Rear mount requirements — page 31 • 8.5 Preparing the mounting surface — surface mounting — page 32 •... -
Page 30: Tools Required
2. Portrait or landscape surface mount. 8. Masking / self adhesive tape. 3. Portrait or landscape retrofit / offset mount — this is typically used when replacing an existing Raymarine® instrument, such as ST60, ST60+, i50, i60, i70, i70s. Note:... -
Page 31: Accessory Mounting Options
Bracket mast size compatibility Other widgets will not be affected by the performance display’s level. Before obtaining and attempting to install an Alpha display mast bracket, ensure that the diameter of your mast does not exceed the minimum and For more information on the performance display’s [SailPoint] and [3D maximum mast bracket tolerances specified below. -
Page 32: Preparing The Mounting Surface - Surface Mounting
8.5 Preparing the mounting surface — surface 1. Mark the cutout line identified on the supplied mounting template on the mounting surface. mounting 2. Use a drill and an appropriate size drill bit or hole cutter to cut out the corners of the cutout line. -
Page 33: Preparing The Mounting Surface - Retrofit / Offset Mounting
3. Use a drill and an appropriate size drill bit or hole cutter to cut out the corners of the cutout line. The corner diameter for the instruments is 8.00 mm (0.31 in). 4. Use a jigsaw or similar cutting tool to cut out the remainder of the cutout area. -
Page 34: Surface And Flush Mounting
8.8 Surface and flush mounting Important: Before preparing the mounting surface ensure that: Follow the steps below to surface or flush mount the performance display. • Your selected location meets the location requirements. For details refer Important: p.22 — Location requirements In above-decks installations, marine-grade sealant should be used to seal •... -
Page 35: Retrofit / Offset Mounting
8.9 Retrofit / offset mounting The performance display can be retrofitted to the mounting position of an existing Raymarine® instrument, such as the ST60, ST60+, i50, i60, i70, i70s. In this mounting scenario, the performance display bezel protrudes from the mounting surface, with a 24 mm (0.9 in.) gap between the bezel and the mounting surface. - Page 36 Warning: Collision avoidance In order to avoid potential physical damage to the unit, ensure that the environment surrounding the unit is clear from potential objects that may cause collisions. Warning: Marine-grade sealant Only use marine-grade neutral cure polyurethane sealants. Do NOT use sealants containing acetate or silicone, which can cause damage to plastic parts.
-
Page 37: Chapter 9 Network Connections
CHAPTER 9: NETWORK CONNECTIONS CHAPTER CONTENTS • 9.1 Network connections overview — page 38 Network connections... -
Page 38: Network Connections Overview
9.1 Network connections overview 3. Compatible Raymarine® multifunction display / chartplotter (Axiom 2 Pro illustrated). The following section will provide two different network connection scenarios, one of which is required in order for the performance display to function: Note: •... -
Page 39: Network Cable Extensions
For more information, refer to: p.42 — Inline fuse and thermal breaker ratings Alpha 9 performance display — receiving power directly from a 12 V or 24 V power source via a separately available power and RayNet cable. -
Page 40: Chapter 10 Power Connections
CHAPTER 10: POWER CONNECTIONS CHAPTER CONTENTS • 10.1 Power options — page 41 • 10.2 Direct power connection — page 41 • 10.3 Inline fuse and thermal breaker ratings — page 42 • 10.4 Power distribution — page 42 • 10.5 Power cable extension (12 / 24 V systems) —... -
Page 41: Power Options
4 performance displays maximum in a series and up to 10 performance displays per system). For more information, refer to: Alpha Series performance display. p.38 — Multiple instrument connections 2. 8-pin right-angled power to RayNet and bare end power wires cable, available separately. -
Page 42: Inline Fuse And Thermal Breaker Ratings
When connecting multiple Alpha displays in a series (up to 4 maximum), ensure that the fuse rating is appropriate for the total power consumption of all daisy-chained Alpha Implementation —... - Page 43 Implementation — direct connection to battery not possible and more than 1 item of equipment shares a breaker, use individual inline fuses for each power circuit to provide the necessary protection. • The power cable supplied with your product includes a drain wire, which must be connected to the vessel’s common RF ground.
-
Page 44: Power Cable Extension (12 / 24 V Systems)
Suitable for a vessel with a common RF ground point. In this scenario, the Cable length in meters Wire gauge in AWG Wire gauge in AWG power cable’s drain wire should be connected to the vessel’s common (feet) ) for 12 V supply ) for 24 V supply ground point. -
Page 45: Multiple Performance Display Connections
A maximum of 4 performance displays can be daisy-chained in a series and a maximum of 10 performance Alpha 9 performance display — receiving power directly from a 12 V or displays can be connected per system. - Page 46 Note: For information on the available cables and accessories, refer to the following section: p.63 — Spares and accessories...
-
Page 47: Chapter 11 System Checks
CHAPTER 11: SYSTEM CHECKS CHAPTER CONTENTS • 11.1 Initial power on test — page 48 System checks... -
Page 48: Initial Power On Test
11.1 Initial power on test Before attempting an initial power on test, ensure that you have correctly networked and powered the performance display in accordance with the instructions provided throughout the following sections: • p.37 — Network connections • p.40 — Power connections Once the power cable has been connected and adequate power is being supplied, the performance display will begin to boot. -
Page 49: Chapter 12 Operation
CHAPTER 12: OPERATION CHAPTER CONTENTS • 12.1 Operation instructions — page 50 Operation... -
Page 50: Operation Instructions
12.1 Operation instructions For operation instructions, please refer to the “Alpha Series Performance Display Operation Instructions” documentation. QR code Description The Alpha Series Performance Display Operation Instructions (81415) can be downloaded from the Raymarine® website: www.raymarine.com/manuals. Please check the website to ensure you have the... -
Page 51: Chapter 13 Troubleshooting
CHAPTER 13: TROUBLESHOOTING CHAPTER CONTENTS • 13.1 Troubleshooting — page 52 • 13.2 Power up troubleshooting — page 52 • 13.3 System data troubleshooting — page 53 • 13.4 Miscellaneous troubleshooting — page 53 • 13.5 Performing a factory reset — page 54 Troubleshooting... -
Page 52: Troubleshooting
Refer to the Alpha Series and operation of your product. Performance Display Installation Instructions Before packing and shipping, all Raymarine® products are subjected to (87457) for information on the appropriate comprehensive testing and quality assurance programs. If you do experience... -
Page 53: System Data Troubleshooting
In the unlikely event that the product’s software and installing the latest software from the corruption. has become corrupted, try downloading Raymarine® website. Refer to your multifunction and installing the latest software from the display / chartplotter’s operation instructions Raymarine® website. Refer to your multifunction for details on updating software for connected display / chartplotter’s operation instructions... -
Page 54: Performing A Factory Reset
Possible solutions Check relevant fuses and breakers. Intermittent If you are experiencing problems with the Alpha Series performance display problem with power 2. Check that the power supply cable is sound which cannot be resolved using the troubleshooting advice provided, you... -
Page 55: Chapter 14 Maintenance
CHAPTER 14: MAINTENANCE CHAPTER CONTENTS • 14.1 Service and maintenance — page 56 • 14.2 Routine equipment checks — page 56 • 14.3 Cleaning the display case — page 56 • 14.4 Cleaning the display screen — page 56 • 14.5 Cleaning the sun cover —... -
Page 56: Service And Maintenance
This product contains no user serviceable components. Please refer all A coating is applied to the performance screen. This makes it water repellent, maintenance and repair to authorized Raymarine dealers. Unauthorized and prevents glare. To avoid damaging this coating, follow this procedure: repair may affect your warranty. -
Page 57: Chapter 15 Technical Support
CHAPTER 15: TECHNICAL SUPPORT CHAPTER CONTENTS • 15.1 Raymarine product support and servicing — page 58 • 15.2 Diagnostic product information — page 59 • 15.3 Learning resources — page 59 Technical support... -
Page 58: Raymarine Product Support And Servicing
Italy (Raymarine subsidiary): Raymarine offers dedicated service departments for warranty, service, and repairs. • E-Mail: support.it@raymarine.com Don’t forget to visit the Raymarine website to register your product • Tel: +39 02 9945 1001 for extended warranty benefits: https://www.raymarine.com/en- Spain (Authorized Raymarine distributor): us/support/product-registration •... -
Page 59: Diagnostic Product Information
Raymarine regularly runs a range of in-depth training courses to help you • Tel: +45 437 164 64 make the most of your products. Visit the Training section of the Raymarine website for more information: Russia (Authorized Raymarine distributor): •... -
Page 60: Chapter 16 Technical Specification
CHAPTER 16: TECHNICAL SPECIFICATION CHAPTER CONTENTS • 16.1 Physical specification — page 61 • 16.2 Power specification — page 61 • 16.3 Network specification — page 61 • 16.4 Environmental specification — page 61 • 16.5 Display specification — page 61 •... -
Page 61: Physical Specification
Width: • Alpha 7 display — 118.6 mm (4.67 in) Alpha displays in a series (up to 4 maximum), ensure that the fuse rating is appropriate for the total power consumption of all daisy-chained Alpha • Alpha 9 display — 148.9 mm (5.86 in) displays in your system. -
Page 62: Conformance Specification
Specification • Alpha 7 display — 170 PPI PPI (Pixels Per Inch): • Alpha 9 display — 163 PPI Color: 24-bit color (16.7 million colors) Refresh rate: 60 Hz 16.6 Conformance specification Specification Europe, Australia & New Zealand: EN 60945:2002... -
Page 63: Chapter 17 Spares And Accessories
CHAPTER 17: SPARES AND ACCESSORIES CHAPTER CONTENTS • 17.1 Spares — page 64 • 17.2 Accessories — page 64 • 17.3 RayNet to RayNet cables and connectors — page 65 Spares and accessories... -
Page 64: Spares
The following accessories are available for your product: Suncover. 2. Mounting gasket. 3. (Alpha 7 only) mounting bracket kit. 4. (Alpha 9 only) mounting bracket kit. 8-pin right-angled power to RayNet and bare end power wires cable. 2. 8-pin right-angled daisy chain cable. -
Page 65: Raynet To Raynet Cables And Connectors
17.3 RayNet to RayNet cables and connectors Standard RayNet connection cable with a RayNet (female) socket on 4. RayNet to RayNet right-angle coupler / adapter. Suitable for connecting both ends. RayNet cables at 90° (right angle) to devices, for installations where space is limited. - Page 67 Index Diagnostics....................59 Exporting product information ............. 59 Viewing product information ............... 59 Dimensions....................21 Accessories ..................... 64 Network cables..................65 RayNet cables..................65 Applicable products .................12 Electromagnetic Compatibility..............23 EMC, See Electromagnetic Compatibility Cable Bend radius..................27 Factory reset ................... 54 Protection ....................
- Page 68 Mast mount....................31 Miscellaneous troubleshooting ............... 53 Service Center..................58 Mounting ....................29 Servicing....................56 Settings Factory reset..................54 Software updates ..................16 Network cable extension................. 39 Spares ..................... 64 Network connections ................ 38, 45 Spares and accessories Accessories ..................64 Spares....................
- Page 69 Warranty ....................9, 58 WEEE Directive..................9...
- Page 72 Raymarine (UK / EU) Marine House, Cartwright Drive, Fareham, Hampshire. PO15 5RJ. United Kingdom. Tel: (+44) (0)1329 246 700 www.raymarine.co.uk Raymarine (US) 110 Lowell Road, Hudson, NH 03051. United States of America. Tel: (+1) 603-324-7900 www.raymarine.com...