Maintenance - HOMCOM 820-359V80 Owner's Manual

5. Setting electro lock
The Electro Lock can help avoid the heater from being accidentally engaged by children.
The locking mechanism can be set in both the ON and OFF modes.

MAINTENANCE

1.Turn off the heater on by pressing the ON/OFF button on the control panel or by
pressing the Power button on the supplied remote control.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes
to clean the heater. This may cause damage or deterioration to the surface of the
heater.
5. DO NOT immerse the heater in water.
6. Wait until the unit is completely dry before use.
7. If won't use the unit for a long time, please take out battery in remote control
according to following steps, then take care of the remote control.
Remote control
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-
up, use the original packaging to repack the unit.
Press Temp Up and Temp Down buttons at the same
time for 3 seconds. Locking is complete when you hear
a beep. When locked, the functions of the control panel
and remote will be locked for use.(LC displayed on the
digital screen)
When you need to unlock it, press Temp Up and Temp
Down buttons at the same time for 3 seconds. You will
hear a beep .The control panel and remote control will
become functional again.
Battery cover
8
Battery