Bicker IUPS-401-B8 User Manual page 25

User's Manual IUPS-401-B8
Article Interface
No.
IUPS-401-B8
USB
Reboot function
If mains voltage returns after a power failure while Windows® is already shutting down, the UPS switches
the PC off (after the shut-down period) and switches it on again after app. 30 sec...5 minutes depending on
the battery capacity (the higher the capacity, the shorter the restart time). This latency is required to ensure
sufficient energy for a secure shutdown in case of a new power failure. Observe BIOS settings to restart the
mainboard.
* Tolerance of switch-off threshold ≤3 %
For futher information please visit our website www.bicker.de and refer to the article number.
Status display and Alarm
Status display
Normal UPS mode
Battery charge (mains mode)
UPS battery mode
UPS battery mode (Battery low)
Overload (Normal mode)
Internal UPS failure
Overtemperature
Battery defect
Load sensor
switch off
≤33 W*
Alarm
–
–
2 beep sounds every 3 seconds
4 beep sounds a second
Continuous sound
8 beep sounds per 2 sec.,
2 sec. stillness
8 beep sounds per 2 sec.,
2 sec. stillness
–
UPS management software
UPSilon 2000 and DSUB9 to USB cable
included in delivery (Windows® 7, 8, 10,
Server 2012).
Alarm sound LED
detachable
green
green flashing
yes red flashing
no red flashing (quickly)
no red
no red flashing (quickly)
yes red flashing (quickly)
red flashing (quickly)
25