Interface And Software - Bicker IUPS-401-B8 User Manual

User's Manual IUPS-401-B8

5. Interface and Software

The interface at the back of the IUPS can be connected to the USB interface of the com-
puter via a special cable (with PCB) which is included in delivery. When the software
(UPSilon 2000) is installed,
1. a warning message can be displayed at the monitor in case of mains power failure.
2. open files can be saved automatically.
3. the UPS can be switched off after the computer was shut down.
4. a restart of the PC is possible when mains power returns during the shutdown
of the operating system. Please observe BIOS settings of the mainboard!
The User's Manuals „UPSilon 2000" including current software description are
available on www.bicker.de
NOTE: While the manual was going to print, the software provision was switched from CD
to download link. The CD may therefore no longer be included in the scope of delivery. In
this case, please use the download link only. The serial number for activating the software
can be found on a yellow sticker enclosed.
PROCEED AS FOLLOWS:
1). Download the software via link or QR code.
2.) Execute the .exe file, to install the software.
3). Enter serial number to complete software installation.
4). Check if software is in taskbar and if it is activated.
21