4.1,
4.2.
4.3.
4.4.
41
ACCESS TO PARTS
DISMANTLING THE CABINET
—
Unplug the mains connector
—
Fold up the handle to the top. For this push the buttons of the handle
~—
Loosen the central screw at the rear
—
Remove the lead-through of the mains cable from the cabinet
—
Dismantle the cabinet
UNIT 2, DISPLAY UNIT
—
Remove the cabinet, see 4.1.
—
Remove the 5 screws of the PCB/U2 and disconnect cable plug BU3.
—
All parts of unit 2 are now within easy reach and easy interchangable.
PUSHBUTTONS
For changing knobs for pushbuttons it is necessary to open the cabinet and remove unit 2, see 4.2.
CARRYING HANDLE
—
Remove the cross-head screws that are now accessible.
—
Bend both arms of the handle slightly outwards and take it off the cabinet.
—
Grip and arms of the carrying handle must be ordered separately (see mechanical
parts list). A
complete carrying handle can easily be constructed by pressing the arms into the grip.
| MATS36
Fig. 14
Removing the carrying handle