Riello NXHM 018 Operation Manual page 64

7.2.2 WEATHER TEMP. SET
• WEATHER TEMP. SET=WEATHER TEM-
PERATURE SET.
• WEATHER TEMP. SET function is used to
preset the desired water flow temperature
depending on the outside air temperature.
During the warmer weather the heating is
reduced. To save energy, the WEATHER
TEMP. SET can decrease the desired
water flow temperature when the outdoor
air temperature increased in heating mode.
Go to > PRESET TEMPERATURE >
WEATHER TEMP. SET. Press
The following page will appear:
PRESET TEMPERATURE
PRESET
TEMP.
ZONE1 C-MODE LOW TEMP.
ZONE1 H-MODE LOW TEMP.
ZONE2 C-MODE LOW TEMP.
ZONE2 H-MODE LOW TEMP.
ON/OFF
i
INFORMATION
• WEATHER TEMP. SET have four kinds of
curves:
1. the curve of the high temperature set-
ting for heating;
2. the curve of the low temperature setting
for heating;
3. the curve of the high temperature set-
ting for cooling;
4. the curve of the low temperature setting
for cooling.
It only uses the curve of the high tempera-
ture setting for heating, if the high tempe-
rature is set for heating.
It only uses the curve of the low tempera-
ture setting for heating, if the low tempera-
ture is set for heating.
It only uses the curve of the high tempera-
ture setting for cooling, if the high tempe-
rature is set for cooling.
It only uses the curve of the low tempera-
ture setting for cooling, if the low tempera-
ture is set for cooling.
.
WEATHER ECO
TEMP. SET MODE
OFF
OFF
OFF
OFF
• See FOR SERVICEMAN > COOL MODE
SETTING and > HEAT MODE SETTING
in "Installation and owner's manual".
• The desired temperature (T1S) can't be
adjusted, when the temperature curve is
set ON.
• If you want to use heat mode in zone 1,
you select ZONE1 H-MODE LOW TEMP.
If you want to use cool mode in zone 1,
you select ZONE1 C-MODE LOW TEMP.
If you select "ON", it will show a page
WEATHER TEMP. SET TYPE with 9 types
to choose.
Use , to scroll. Press
PRESET TEMPERATURE
PRESET
TEMP.
ZONE1 C-MODE LOW TEMP.
ZONE1 H-MODE LOW TEMP.
ZONE2 C-MODE LOW TEMP.
ZONE2 H-MODE LOW TEMP.
ON/OFF
• If the WEATHER TEMP. SET is activated,
the desired temperature can not be
adjusted on the interface.
Press the
ture on home page. The following page
will appear:
01-01-2018
Weather temp. set function is on.
Do you want to turn off it?
NO
CONFIRM
Move to "NO", press
home page, move to "YES", press
set the WEATHER TEMP. SET.
64
to select.
WEATHER ECO
TEMP. SET MODE
, , to adjust the tempera-
23:59
YES
to come back to
ON
OFF
OFF
OFF
13°
to re-