EGO LM2110E-SP Operator's Manual page 11

WARNING:
Ensure that other people and pets
remain at least 30m away from the mower when it is in
use.
WARNING:
The blade will continue to rotate for
a few seconds after the mower is turned off. Allow the
motor/blade to stop rotating before starting it again. Do
not rapidly turn the mower off and on.
WARNING:
Stop the blade if the lawnmower has to
be tilted for transportation when crossing surfaces other
than grass and when transporting the lawnmower to and
from the area to be mowed.
WARNING:
Do not tilt the lawn mower when starting
switching on the motor, except if the lawn mower has to
be tilted for starting. In this case, do not tilt it more than
absolutely necessary and lift only the part which is away
from the operator.
NOTICE:
The motor cannot be started unless:
◾
The side rails are fully extended (Fig. N).
◾
Both green handle-locking clamps are securely closed
(Fig. O).
◾
The handle is locked into one of the three operating
positions.
◾
To Start
1) Attach the battery pack to the mower.
2) Depress the safety button (Fig. P).
3) With the safety button depressed, pull the bail switch
upward to meet the handle and release the safety
button (Fig. Q).
◾
To Stop
1) Fully release the bail switch (Fig. R).
2) The electric brake in the Automatic Braking
Mechanism will stop the blade rotation.
3) Stop the machine, and remove the battery pack to
make sure that all moving parts have come to a
complete stop after striking a foreign object, and to
inspect the machine for damage and make repairs
before restarting and operating the machine.
4) Stop the machine, and remove the battery pack
to make sure that all moving parts have come to
a complete stop, if the machine starts to vibrate
abnormally, and then to immediately inspect for
damage, replace or repair any damaged parts and to
check for and tighten any loose parts.
VARIABLE-SPEED SELF-PROPEL SYSTEM
LM2110E-SP mower is equipped with variable-speed,
self-propel capability. This system is independent of the
blade On/Off switch. It is not dependent on blade rotation.
For example, when you have completed cutting your lawn,
you can use the self-propel to propel the mower back to
your storage location without blade rotation. Or you may
choose to operate the mower as a non-self-propelled
mower to maximize battery running time.
To operate the self-propel system without blade rotation,
turn the self-propel speed-control knob on, press the self-
propel trigger(s).There are two self-propel triggers. Press
either trigger to start the self-propel function (Fig. S).
To turn the self-propel off, release the self-propel trigger,
turn the self-propel speed-control knob off.
LED HEADLIGHTS (Fig. T)
To turn on the headlights, press the headlights button
(Fig. U).
To turn off the headlights, press the button again.
POWER INDICATOR ON THE MOWER
56 VOLT LITHIUM-ION CORDLESS MOWER — LM2110E-SP
Mower-
status Meaning
indicator
Mower is
working
properly;
Solid green
battery has
at least 15%
of its charge.
The side
rails are
not fully
extended.
Flashing
The handle
green
is not
locked in an
operating
positions.
Flashing
Low battery.
red
The mower
Solid
stops due to
orange
overheating.
Action
None required.
Make sure that the
side rails are fully
extended.
Make sure that the
handle is locked
in an operating
positions.
Stop the mower and
charge the battery
pack.
Remove the battery
from the mower,
move them to the
shade and cool
them for at least 15
minutes.
11