Playing Preset Radio Stations - Sony FH-C33X Operating Instructions Manual

12
Se ea ee ee eee
Presetting Radio
Siations
You can store radio frequencies in the
tuner's memory to tune in your favourite
stations quickly. You can preset up to 20
FM stations, 10 MW stations and 10 SW
_ stations in any order.
Use the buttons on the unit for presetting
stations.
POWER—ON
1 Press TUNER/BAND (or BAND on the
remote commander) repeatedly until the
band you want appears.
FM + MW — SW
2 Press TUNER/TIMER (-+/-) to tune in
the station you would like to store.
3 Press MEMORY/NEXT.
"MEMORY" and the preset station
number appear in the display for 8
seconds.
Preset station number
4 Decide on a preset number for the radio
station (1 to 20 for FM, 1 to 10 for
MW and SW). While "MEMORY?" is lit,
press TUNER/TIMER (+ /-) to display
the preset number you decided on.
Chapter 3: the Radio
5 Press MEMORY/NEXT.
"MEMORY" disappears, and the station
is stored at the preset number you
decided.
6 Repeat steps 1 to 5 for each station you
would like to store.
To erase a stored station
Store a new station at a previously used
preset station number. It will erase the old
station and replace it with the new station.
If you have trouble storing a station
Make sure "MEMORY?" is lit in the display.
If not, press MEMORY/NEXT again so that
"MEMORY" lights up (for about four
seconds) in the display, and then proceed
with steps 4 and 5.
If you made a mistake
Press MEMORY/NEXT again and then
proceed with steps 4 and 5.
Se Soe SE a a
Playing Preset Radio
Stations
Once you have preset the stations, use the
TUNER/TIMER (-+/~) buttons to quickly
tune in your favourite stations.
POWER—ON
tN) =
1 Press TUNER/BAND (or BAND on the
remote commander) repeatedly to select
the band you want.
FM > MW — SW
2 Press PRESET/TUNING so that the
PRESET indicator lights up.
3 Press TUNER/TIMER (+/-) (or PRESET
(~/ +) on the remote commander) to
tune in a preset station.
The station frequency appears and the
system begins receiving the stations.